Both Sides Brushed Aluminum Signs

Both Sides Brushed Aluminum Signs

Brushed or dull polished metal is metal with a unidirectional satin finish. It is produced by polishing the metal with a 120–180 grit belt or wheel then softening with an 80–120 grit grease-less compound or a medium non-woven abrasive belt or pad. Brushing gives metal a distinctive look, as it...
Chat Now

Product Details

 Brushed or dull  polished metal is metal with a unidirectional satin finish.

It is produced by polishing the metal with a  120–180 grit belt  or wheel then softening with an 80–120 grit grease-less compound or a medium  non-woven abrasive belt or pad.

Brushing gives metal a distinctive look, as  it retains some but not all of its metallic lustre and is given a pattern of very fine  lines parallel to the brushing direction. For this reason, it is commonly used  for signs to better surface to paste the reflective film on.

Make it both side brushed could be as  customized

 

Our signs normally use 5052 H38 for US and  Australia market

Aluminum details :

  • 5052 Temper H38 Chemical  Composition Limits (%)

Si

Fe

Cu

Mn

Mg

Cr

Ni

Zn

Ti

Others

Total

AL
     Min.

0.25

0.4

0.10

0.10

2.2-2.8

0.15-0.35

 -

0.10

 0.05

0.15

 Remainder

Magnesium  gives this alloy its enhanced corrosion resistance, work ability, strength, and  weld ability. Typical uses include aircraft fuel tanks, electronic mounting  plates and panels, fan blades, refrigeration liners, storm shutters, and  utensils.     

  • Mechanical Property Limits

Alloy
      Temper

Specified
     thickness

Tensile strength

Elongation
     in 2 inches %

Ultimate

Yield

 

inches

min

max

min

max

Yield

5052
     H38

0.006-0.007
     0.008-0.031
     0.032-0.128

39.0
     39.0
     39.0

-
     -
     -

32.0
     32.0
     32.0

-
     -
     -

2
     3
     4

 


Inquiry